Product Introduction
This series of instrument is a signal generator with features such as highly stable, broadband and multi-function .The design of appearance is strong and elegant. And it is easy to operate, could directly generated sine wave,
triangle wave, square wave, ramp, pulse, and has VCF input control functions. TTL / CMOS can be as synchronized
output with the OUTPUT. The adjusted Waveform is symmetry and have reverse output, DC level can be adjusted continuously.
Frequency meter could be as the display of internal frequency and measure the outside frequency.
It is particularly suitable for teachings, scientific researching and experimenting of electronic and pulse circuits.
Main Parameter
1) Frequency range: 0.1Hz-2MHz (LW-1641)
0.1Hz-5MHz (LW-1642)
0.1Hz-10MHz (LW-1643)
2) Waveform: sine wave, triangle wave, square wave, Positive and Negative sawtooth and Positive and Negative pulse
3) Square-wave front: LW-1641<100ns
LW-1642<50ns
LW-1643<35ns
4) Sine wave
Distortion :< 1% (10Hz-100KHz)
Frequency response: 0.1Hz-100 KHz ≤±0.5dB
100 KHz-5MHz ≤±1dB (LW-1642)
100 KHz-2MHz ≤±1dB (LW-1641)
5) TTL / CMOS output
Level: TTL Pulse low level is no more than 0.4V, high level is no less than 3.5V.
Rising time: no more than 100ns
6) Output: Impedance: 50Ω±10%
Amplitude: no less than 20vp-p (Empty load)
Attenuation: 20dB 40dB
DC bias 0-±10V (Continuously adjustable)
7) Adjustment range of symmetry: 90:10-10:90
8) VCF input
Input voltage:-5V-0V±10%
The maximum voltage ratio: 1000:1
Input signal: DC-1KHz
9) Frequency meter
Measuring range: 1Hz-20MHz
Input Impedance: no less than 1 MΩ/20pF
Sensitivity: 100mVrms
The maximum input: 150V (AC+DC) with attenuator
Input attenuation: 20dB
Measurement error: ≤0.003%±1digit
10) The scope of adaptation of power
Voltage: 220V±10 %( 110V±10%)
Frequency: 50Hz±2Hz (220V±10%)
Power: 10W (Optional)
11) Environmental conditions
Temperature: 00C -400C
Humidity: ≤RH90%
Atmospheric pressure: 86kPa-104kPa
12) Dimension (L ×W×H):310×230×90mm
13) Weight :About2-3Kg
